How To Install Water Filter For Washing Machine

Septic System: How to Filter Out Laundry Lint

Updated: Jun. 24, 2019

The secret? Proceed the lint out

washing machine lint trap Family unit Handyman

Lint from washing machines, much of information technology nondegradable, can clog upwardly septic fields and shorten their useful life by years. A fine mesh lint trap tin make a huge divergence.

You might also similar: TBD

Lint catcher for washing machine: Mountain the filter holder

Photo i: Mount the filter

Set the mesh filter into the filter container and lock the top downward with the locking clips.

Photo 2: Attach the hoses

Screw adapters to the top and lesser of the filter. Push the discharge hoses onto the spinous fittings and tighten the hose clamps.

One major cause of septic field failure is washing machine lint—generally from synthetic fibers that never degrade, such equally nylon and polyester, but also from natural fibers similar cotton that dethrone very slowly. Eventually this lint can create impenetrable mats in the soil surrounding the drain lines, preventing liquid from being readily absorbed. Fortunately, preventing this problem can exist equally simple as putting a high-quality filter on your laundry machine discharge hose.

Inexpensive, sock-type lint filters or drain baskets grab bigger fibers, but most of the lint washes right through—and you lot tin can't even use them unless your washer discharges into a laundry tub. A better selection is an enclosed, very fine mesh filter that captures more than ninety per centum of the lint. It's not cheap, simply it'll add years of service to your drain field.

Installation is elementary. Mount the filter holder on the wall near the laundry tub or discharge pipe. Skid in the filter (Photo 1), lock the elevation down and adhere the discharge hoses to the filter container (Photo 2). Remove the reusable filter bag and empty it when it's one-half full (unremarkably after virtually viii to 15 loads). If you forget to modify the filter, the water just drains around it, so in that location'southward no danger of overflow. Replacement filters are a bit expensive, rarely demand replacing co-ordinate to the manufacturer.

Septic protector filters are bachelor from the manufacturer (Septic Protector Filtrol 160; septicprotector.com), local septic supply companies, and online.